Bosch AN 用户手册

en | Connection and set-up

FLEXIDOME 5000 AN

AM18-Q0648 | v1.0 | 2013.03

Installation Manual

Bosch Security Systems

To assist in setting up the camera, connect a monitor to the 

miniature 2.5 mm jack socket (2). This socket provides a 

composite video signal (with sync). An optional cable (code 

number S1460) is available for making this connection. When 

the S1460 cable is attached, there is no video available on the 

BNC connector to avoid interference.

Camera parts

The Heater will be hot when in operation - Do not touch.Always 

switch the heater off when working on the camera, refer to 

submenu, page 41.

1.

Heater

2.

Monitor jack socket

A

B

C