AT&T 8110 用户手册
3
Dial call 2 (or another feature)
Note: If you hang up, call 1 sends a 3-burst priority
ring.
ring.
To put call 2 on hold and return to call 1
1
Press [ FLASH ] [recall dial tone]
2
Dial Hold code
●
Call 2 is put on hold, and call 1 is reconnected
SEND ALL CALLS
[ ]
Note: If you hang up, call 2 sends a 3-burst priority
ring.
ring.
To complete call 2 and return to call 1
1 After party on call 2 hangs up, hang up, receive
3-burst priority ring, and lift handset.
LEAVE WORD CALLING
[ ]
To leave a message after dialing an extension
(when your call is not answered), you hear
coverage or busy tone, or you have been put on
hold
(when your call is not answered), you hear
coverage or busy tone, or you have been put on
hold
1 Press [ FLASH ] [recall dial tone]
2 Dial Leave Word Calling code
[confirmation tone]
●
Message light goes on at called telephone
Note: If reorder tone is heard, message is not
stored; try again.
stored; try again.
2
To leave a message without ringing an extension
1
Dial Leave Word Calling code
[dial tone]
●
2
Dial the extension [confirmation tone]
●
Message light goes on at called telephone
3
To cancel a Leave Word Calling message
●
Note: You cannot cancel a message left for an AUDIX
subscriber.
subscriber.
1 Dial Leave Word Calling Cancel code
[dial tone]
AT&T
2 Dial extension [confirmation tone]
Note: If reorder tone is heard, message is not
deleted; try again.
deleted; try again.
PRIORITY CALLING
[ ]
To place a priority call
1
Dial Priority Calling code
[dial tone]
2
Dial extension
To send all incoming calls (except priority calls)
immediately to coverage
immediately to coverage
1 Dial Send All Calls code
[confirmation tone]
2 Hang up
To cancel Send All Calls
1 Dial Send All Calls Cancel code
[confirmation tone]
●
Your calls will ring at your own telephone again
TRANSFER
[
✔
]
To send present call to another extension or
outside number
outside number
1 Press [ FLASH ] [recall dial tone]
●
Present call is put on hold
Dial number that call is to be transferred to
[ringback tone]
[ringback tone]
Remain on line and announce call; if number
dialed is busy or not answered, press [ FLASH ]
twice to return to held call
dialed is busy or not answered, press [ FLASH ]
twice to return to held call
Hang up
Transfer is completed
Prepared by
AT&T GBCS Product Documentation
Development
AT&T GBCS Product Documentation
Development
©1993 AT&T
Middletown, NJ 07748-1998
All Rights Reserved
Issue 1, December 1993
Printed in USA
7
8