Plasmon LF 8600 用户手册

1. Open the media access door.

2. Manually push the shuttle all the way to the left and insert the foam shipping block to hold it in 

place. Close the media access door.

3. Roll the LF 8600 up onto its shipping pallet and lock all four casters to prevent rolling.

4. Lift the front and rear of the LF 8600 high enough and place the caster support underneath the 

drive.

5. Raise the wooden ramp to the vertical position and place the pallet cushion between the ramp 

and the front panel of the LF 8600. Place the ESD protective packing material on top of the 
drive.

6. Place the two end cushions which hold the accessories box on the top front and rear of the LF 

8600.

7. Place the power and interface cables, User Manual and other accessories into the options and 

accessories box and seal with tape.  Place this box between the top end cushions.

8. Slip the corrugated shipping carton over the LF 8600 and the raised ramp, and lower the 

carton down to the top of the pallet.

9. Strap the carton to the pallet at each end.