calls will be ended and conferences will not be available for on demand playback).
Before restarting the Service, check if there are live conferences in progress in the
Live Conferences page or check the call status on the LCD panel of the unit. The Site
Settings page will also display a warning if calls are in progress. If you click on the
Restart Service button while calls are in progress, you will be asked to confirm if you
want to go ahead with the Restart.

Fields with an orange asterisk next to them require
you to restart the service in order for them to become
effective if they have been changed.

Content Server Properties

Administrator Settings > Site Settings

System Name

System Name. Other sys-

tems can call the Content Server using
the System Name, if the Content Server
is registered to the gatekeeper. The
Recording Alias specified in the Default
System Alias will be used for the call.
Other systems can also dial in using the
Content Server’s IP address (in this case,
the Content Server does not need to be
registered to the gatekeeper).

Content Library Host Name

The default

for the Content Server installation is
(local). It is recommended to leave the
Content Library Host Name in the Site
Settings as (local), unless instructed
otherwise by TANDBERG support.

H. Listen Port

Standard

videoconferencing port. Users only
need to change this setting if the local
videoconferencing port at customer site
is set to a different port.

H. Address

The default for the

Content  Server  installation  is  (local).
It  is  recommended  to  leave  the  H.323
address  in  the  Site  Settings  as  (local),
unless instructed otherwise by TANDBERG
support.

E.1 Alias

Other systems can call the

Content Server using the E.164 Alias, if
the Content Server is registered to the
gatekeeper. The Recording Alias specified
in the Default Recording Aliases will be
used for the call.