Tascam MD-CD1MKIII 用户手册

P

This lights when the display master deck is in recording  

standby or playback standby mode.

A

DISC

 lights up when the display master deck has a 

disc loaded and is stopped.

GROUP

 lights up when the display master is the CD 

deck and the Directory playback mode is on, or when 

the display master is the MD deck and the group 

playback mode is on.

TRACK

 is indicated during playback or playback 

standby.

S

Character display
Disc information, track information, menu, message 

and operation status are displayed.

D

This lights when the Timer Play function is on.
It flashes if a disc is not loaded when the Timer Play 

function is on.

F

CAPS, 
These light during title input to indicate either CAPS or 

Japanese character mode. In lower case letter mode, 

there is no indication.

G

EOM
This lights when the remaining track/disc time is less 

than the EOM set value.

K

L

Z

:

H

J

X

H

DIGITAL INPUT MD (coaxial) Terminal
This is the digital input terminal (coaxial) for the MD 

deck.

J

DIGITAL OUTPUTS – MD – CD (coaxial) Terminals
These are the digital output terminals (coaxial). The 

playback signals from the MD deck and the CD deck 

are output through their respective digital output 

terminals.

K

ANALOG INPUT MD (UNBALANCED) Terminals
The analog line input terminals for the MD deck are for 

RCA pin jacks. Rated input level is –10 dBV.

L

(UNBALANCED) Terminals
The analog line output terminals are for RCA pin jacks. 

Rated output level is –10 dBV.
MD: Outputs the MD deck signal. During playback, the 

playback signal is output; during input monitoring, the 

source signal is output.
COMMON: Outputs CD and MD signals. During 

playback of both decks, the output signal depends on 

the 

COMMON?

 option setting on the SYSTEM menu.

CD: Outputs the CD deck signal.

:

DIGITAL INPUT MD (optical) Termainal
This is the digital (optical) input terminal for the MD 

deck.

Z

DIGITAL OUTPUTS – MD –  CD (optical) Terminals
These are the digital output terminals (optical). The 

playback signals from the MD deck and the CD deck 

are output through their respective digital output 

terminals.

X

CONTROL I/O (RS-232C) Connector
RS-232C compatible serial control from an external 

computer can be performed.