Tascam MD-CD1MKIII 用户手册

Blank Disc 

A blank recordable MD disc has been 

inserted.

Complete 

Editing operation has been successfully 

completed.

Dubbing 
Wait 

The unit is being readied for dubbing.

TOC Reading 

The table of contents data is being 

read.

UTOC 
Writing 

The user table of contents data is 

being written to the disc.

Now Editing 

Editing operation is being performed.

Over Write 

Overwrite recording mode is on.

Key Locked

The entire panel is locked. To release 

the lock, press and hold the TIME and 

DISPLAY buttons simultaneously.

CD Locked

The deck is locked. To release the lock, 

select 

none

 under 

PANEL LOCK?

 

in the SYSTEM submenu of the CD 

menu.

MD Locked 
Eject 
Locked

Disc Error! 

The disc has malfunctioned. Please 

replace with a new disc.

Disc Full! 

No recording time remaining on the 

disc, so new recording is not possible.

Title Full! 

No more titles can be recorded.

D-IN UNLOCK! 

Digital signals are not correctly input.
This message appears if the selected 

input source (coaxial or optical) does 

not correspond to the connected 

terminal or the connected device is 

powered off. Select the input source 

correctly, or turn on the connected 

device.

Not 
Execute!

Editing cannot be completed due to 

MD system limitations.

Not Audio! 

There is no audio signal from DIGITAL 

INPUT.

No Track! 

There are no recorded tracks.

PGM Empty! 

There is no program

PGM Full! 

No new programs can be created.

W_
Protected! 

Write-protected MD disc, so recording 

or editing is not possible.

Pre Master! 

A playback-only MD disc has been 

inserted.

TOC Error! 

TOC data is not correct.

Can't Edit! 

Editing cannot be performed due 

to MD system limitations or editing 

condition limits.

Can't Rec! 

Recording cannot start because the 

Group playback mode is on.

Can't Sel! 

Menu selection cannot be performed 

due to selection prohibitions.

Can't Undo! 

You can’t undo since no editing has 

been done.

Rec Error! 

There was an error during recording. 

Please re-record.

Drive Error! 

There is a problem in the drive.

Sync Rec 
ON! 

The Sync mode is on, so the recording 

cannot be started manually.

Err Group! 

There is a problem in the data of the 

created group.

No Group! 

No groups have been created.

No DIR! 

The directory where the file is has not 

been registered.

Decode Err! 

The MP3 file cannot be played back.

IR Disable! 

All remote control operations are 

disabled.

Format Err! 

The unit does not support the format 

of the MP3 files on the disc.

There is no power to the unit.
Please check that the power cord is properly plugged in.

Disc Error!

The disc may be dirty. Please replace the disc.
Playback is not possible.
This may be due to condensation. In this case, remove 

the disc, turn the power on and wait a few hours, then try 

again.
No sound is output.

Confirm the connections with the audio system.

• 

Check the volume level, and proper amplifier operation.

• 
Recording isn’t possible.

The MD disc is set to write protect. Slide the tab on the 

• 

cartridge to the closed position and try again.
Confirm the connections with the audio system.

• 

Adjust the recording level.

• 

The disc may be for playback only. Please replace it 

• 

with a recordable MD disc.
Remaining recording time on the MD is insufficient. 

• 

Please delete unwanted tracks or replace the MD disc.
Confirm amplifier operation.

• 
Noise or static can be heard.
Please re-position the unit away from strong sources of 

magnetism such as a television.
The MD-CD1MKIII does not retain settings.
While settings are retained each time they are made, in 

some cases they will not be retained when the power is 

turned off too soon. To prevent this from happening, do 

not turn off the power right after making a setting.