Dolby Laboratories ZE-200DVD 用户手册

BASIC OPERATION

POWER ON/OFF

■ Press the [POWER/MUTE] button on the front panel to turn the unit on

■ Press the [POWER/MUTE] button on the front panel for more than 2 sec to turn the unit

off

MUTE CONTROL

■ When the unit is turned on, press the [POWER/MUTE] button on the front panel to mute

the sound; press this button once more to exit MUTE mode.

MODE SWITCH

■ Press the [MODE] button repeatedly to switch between the following modes:

■ Tuner

DVD (Built-in player)

CDC (Multi-CD changer)

AUX

Tuner

Note:

In the following case, the source mode will not change:
■ When no disc is loaded into the headunit, the DVD mode is invalid.

■ When no magazine is loaded into the CD-changer, or the CD-changer is not connected

to the headunit, the CDC mode is invalid.

SWITCH THE DISPLAY MODES

■ Press the [DISP] button repeatedly, to check out different displays on the on the LCD

screen, according to the following sequence. After 5 sec, the display will turn back to the
default display of the current mode automatically.

Tuner:

frequency

(default) clock

CDC: play time (default)

clock

DVD: play time (default)

disc type

clock

AUX:

AUX clock

Note:

■ When the unit is in standby state, only the current time will be displayed on the LCD, if

the clock display is enabled.

SET CLOCK

■ If the current display mode is set to clock mode, pressing the button [DISP] for a little

longer will put the unit into clock set mode.

In clock set mode:
■ Pressing the [DISP] button will switch between Hour and Minute setting.

■ Pressing the [ ] button will increase time data.

■ Pressing the [ ] button will decrease time data.

Note:

■ If there no operation within 5 sec, the device will quit clock set mode.

SYSTEM SETUP

■ When the unit has been turned on, and the current display mode isn’t set to clock mode,

pressing the [DISP] button a little longer will activate the system setup mode.

■ Press the [ ] and [ ] buttons to select the item you want to adjust, then use the [DISP]

button to select a value and apply.

ZE-200DVD Manual E+D_c.indd 13

26.05.2004 14:28:20 Uhr