Durabrand PDV-722 用户手册
IB-PDV722-WM-E-012007
REMOTE CONTROL OPERATION
NOTE:
•
Point the remote control unit from less than 20 feet (6 m) from the remote sensor and within
about 60
about 60
o
of the front of the unit.
•
Batteries should be changed by an adult for safety.
•
Reversing polarities will damage the batteries and possibly your remote. Be sure to follow
polarities ( + and –) as indicated.
polarities ( + and –) as indicated.
•
Do not mix different types of batteries together (Alkaline, Carbon-Zinc, Nickel-Cadmium
etc.), or old batteries with new ones.
etc.), or old batteries with new ones.
•
When the batteries have become discharged, they must be disposed of in a safe manner that
complies with all applicable laws.
complies with all applicable laws.
•
When the batteries becomes weak, the operating distance of the remote control decreases
and you will need to replace the batteries.
and you will need to replace the batteries.
•
When the remote control is not to be used for a long time (2 months or more), remove the
batteries to avoid possible damage that may be caused by battery leakage.
batteries to avoid possible damage that may be caused by battery leakage.
•
Avoid keeping the remote control in extremely hot or humid locations.
•
Do not point bright lights at the remote control sensor (like laser pointers).
•
Do not place objects between the remote control unit and the remote control sensor.
•
Do not use this remote control while using the remote control unit of any other equipment at
the same time, the signals may mix.
the same time, the signals may mix.
1. Push the tab to open the battery cover.
2. Insert 2 size “AAA” alkaline batteries
(included) into the battery compartment
according to the + and – markings
inside the battery compartment, then
replace the battery cover.
according to the + and – markings
inside the battery compartment, then
replace the battery cover.
C. Using the built-in rechargeable battery
The built-in rechargeable battery is suitable for portable use which allows you to enjoy the
unique functions of the main unit outdoors.
Remember to charge the battery fully before initial use (about 5 hours).
NOTE: The built-in rechargeable battery only provides power to the main unit. The slave unit
unique functions of the main unit outdoors.
Remember to charge the battery fully before initial use (about 5 hours).
NOTE: The built-in rechargeable battery only provides power to the main unit. The slave unit
cannot play on the built-in rechargeable battery.
To charge the battery
1. Connect the DVD player and the power source as point A and point B on the previous
pages. After 5 seconds, the battery LED indicator will turn on and start to flash.
2. The battery LED indicator will flash when the battery is charging and remain steadily on
when the battery is fully charged.
3. Charging time is about 5 hours. A fully charged battery delivers about 2.5 hours of viewing time.
4. When the battery is weak, the low power icon “
4. When the battery is weak, the low power icon “
” will appear on the LCD screen and
after that the power automatically turns off. If this occurs, please use the AC adaptor or car
adaptor to recharge the battery or play the set on AC power.
adaptor to recharge the battery or play the set on AC power.
11
IB-PDV722-WM-E-012007.pmd
2/12/2007, 1:19 AM
12