Hitachi hitachi lcd monitor 用户手册

Set up hint
Example) HITACHI DVD 
To operate HITACHI DVD player, press and hold the 

 button, 

followed by the 

 button.

1. Set up the maker

Press 

 

button to indicate the DVD LED on the remote control.

While the DVD LED is flashing, press 

 and 

.

2. Set up the maker type

Release the 

 button while keeping 

 button depressed.

Then, press the 

 button.

3. Confirm the setting

After setting the maker and type, press the POWER button on the remote control. 
If the DVD does not switch on, repeat step 1 and 2 using other maker types as listed in the chart on 

.

NOTE

• Not all models of the listed makers can be operated using this remote control.

When Frequency Display is set to ON, 

the input signal is switched or when 

the RECALL button is pressed.

A guide is displayed for the input 

terminal and the horizontal and 

vertical sync frequency.

When the sync signal is no longer 

detected.

• A guide displays No Sync. Signal, 

and Power Save (for approx. 5 sec.)

• When the condition continues where 

the sync signal cannot be detected, 

indicator lamp of power source 

changes in orange and the mode 

switches to power save mode.

Recheck the personal computer 

power switch status and the 

connection status.

When the input signal does not match 

the monitor specifications or is in an 

unstable status.

A guide displays Invalid Scan Freq.

Recheck the input signal 
specifications.  

~ 

OTHER FEATURES (continued)

DVD Player/STB Selection (continued)

43

Signal Check (RGB mode)

RGB

! No Sync. Signal

! Invalid Scan. Freq.

50

52