Husqvarna 966451906 用户手册

22

 - English

Safety equipment

Press out the throttle control pin (C) with the help 

of a punch. See figure 21.

Loosen the throttle cable (D) and lift out the throttle 

control and the spring. See figure 22.

Loosen the screw on the rear handle. Remove the 

handle insert (A). See figure 19.

•  Carefully clean and check all parts. See figure 

13. Parts must be replaced if cracked or show 

signs of other defects. Always use original 

spare parts.

Check that the spring is intact and retains all its 

tension.

Fig 20

Fig 21

Fig 22

Fig 23

Fig 19

A

Loosen the throttle control lock (B) as shown in the 

figure using a screwdriver or similar tool. Remove it 

then from the shaft in the handle. See figure 20.