Husqvarna 966451906 用户手册

English - 

25

Repair Instructions

Loosen the four screws, which hold the starter 

against the crankcase and remove the starter.

Loosen the screw in the centre of the pulley and 

remove the pulley. See figure 3. Loosen the screws 

on the cassette and remove the cassette and 

spring.

Clean the parts and check:

•  The starter cord.
•  That the starter pawls on the flywheel are intact, 

i.e. that they spring back to the centre and 

move easily.

•   To lubricate the return spring using light oil.

Pull the cord out about 30 cm and lift it into the 

notch on the outside of the starter pulley. Release 

the tension in the return spring by letting the starter 

pulley rotate anti-clockwise. See figures 1 and 2. 

Fig 1

Fig 2

Fig 3a