Husqvarna 966451906 用户手册

44

 - English

When replacing the fuel filter, the old fuel filter must 

be taken out of the tank unit using special tool 

502 50 83-01.

Pull out fuel hose B from the tank unit and pull 

away the filter A. See figure 58.

Fit the new fuel filter A and press the

fuel hose back into place.

The fuel hose is moulded and can only be removed 

from outside of the fuel tank.

Use suitable pliers with a smooth cutting face and 

loosen the hose B from the fuel tank. See figure 58. 

Replace the return hose when required. Tighten 

the fuel hose on the filter side with your fingers.

1.   Dismantle the cylinder cover and the air filter.
2.   Loosen suction hose C and return hose from 

the fuel pump. See figure 59. 

3.  Snap off the fuel pump from the filter holder.

1.   Snap the fuel pump in place in the filter holder. 

See figure 59. 

2.   Fit the return and suction hose on the fuel 

pump.

3.   Assemble the air filter and cylinder cover.

Repair Instructions

Fig 59

Fig 58