Husqvarna 966451906 用户手册

8

 - English

The workshop where the chain saw is to be re-

paired must be equipped with safety equipment in 

accordance with local regulations.

No one may repair the chain saw unless they have 

read and understood the content of this Workshop 

Manual.

This workshop manual contains the following warn-

ing boxes in relevant places.

The fuel used in the chain saw has the following 

hazardous properties:

•  The fluid and its vapour are poisonous.
•  Can cause eye and skin irritation.
•  Can cause breathing problems.
•  Is highly inflammable.

When using compressed air, do not direct the jet 

towards your body. Air can penetrate into the blood 

stream, which can endanger life.

Wear protective earplugs or earmuffs when test 

running.

After test running, do not touch the muffler until 

it has cooled down. Risk of burns. Use protective 

gloves when working with the muffler.

Do not start the chain saw unless the bar, chain 

and clutch cover (chain brake) are fitted, otherwise 

the clutch may loosen and cause personal injury.

Insufficient chain lubrication can result in chain 

breakage, which can cause serious or even life-

threatening injury.

Exercise care to ensure the starter spring does not 

fly out and cause personal injury. Wear protective 

glasses. If the spring tension is activated on the 

starter pulley when it is to be taken up, the spring 

can fly out and cause personal injury.

Check that the brake is applied when removing the 

pressure spring on the chain brake. Otherwise the 

pressure spring can fly out and cause personal 

injury.

After repairing, check the chain brake, see “Assem-

bling chain brake \ Function check”.

Keep in mind the fire risk. The chain saw may emit 

sparks, which cause ignition.

Check the chain catcher and replace it if it is dam-

aged.

Introduction and safety instructions