Husqvarna 436 LI 用户手册
40 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/
EC.
Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound
pressure level is a standard deviation of 1 dB (A).
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound
pressure level is a standard deviation of 1 dB (A).
Note 3: Equivalent vibration level, according to EN 60745-2-13. Reported data for equivalent vibration level has a typical
statistical dispersion (standard deviation) of 1 m/s
statistical dispersion (standard deviation) of 1 m/s
2
. Declared vibration data from measurements when the machine is
fitted with a bar length and recommended chain type. If the machine is fitted with a different bar length, the vibration level
may vary by max.
may vary by max.
± 1.5 m/s
2
.
- The declared vibration total value has been measured in accordance with a standard test method and may be used
for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessement
of exposure.
for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessement
of exposure.
436 Li
536 LiXP
Motor
Type
BLDC (brushless) 36V
BLDC (brushless) 36V
Features
Low energy mode
savE
savE
Lubrication system
Type of oil pump
Automatic
Automatic
Oil tank capacity, litre
0,20
0,20
Weight
Chain saw without battery, bar and chain, empty chain oil
tank, kg
tank, kg
2,5
2,4
Noise emissions (see note 1)
Sound power level, measured dB (A)
104
104
Sound power level, guaranteed L
WA
dB (A)
106
106
Sound levels (see note 2)
Equivalent sound pressure level at the operator’s ear, dB(A) 93
93
Equivalent vibration levels, a
h
(see note 3)
Front handle, m/s
2
3,5
2,4
Rear handle, m/s
2
4,8
3.0
Chain/bar
Recommended bar lengths, inch/cm
10-14/25-35
10-14/25-35
Usable cutting length, inch/cm
9-13/23-33
9-13/23-33
Type of drive sprocket/number of teeth
Spur/6
Spur/6
Maximum chain speed / (savE), m/s
15 (12)
20 (15)
Approved batteries for the chain saw
models above
models above
Battery
BLi110
Type
Lithium-Ion
Battery capacity, Ah
3.0
Voltage, V
36
Weight, kg
1.2
Approved chargers for the specified batteries, BLi.
Battery charger
QC120
QC330
Mains Voltage, V
220-240
100-240
Frequency, Hz
50-60
50-60
Power,W
125
330