Husqvarna 359/G 用户手册

下载
页码 44
 
KEY 
 
T
 
O SYMBOLS
 
2
 
 – 
 
English
 
Symbols on the mac
 
hine:
 
W
 
ARNING! Chain saws can be 
dangerous!  Careless or improper use 
can result in serious or fatal injury to the 
operator or others.
Please read the operator’s manual 
carefully and make sure you 
understand the instructions before 
using the machine.
Always wear:
Approved protective helmet
Approved hearing protection
Protective goggles or a visor
Both of the operator
 
 
s hands must be 
used to operate the chain saw. 
Never operate a chain saw holding it with 
one hand only. 
Never let the guide bar tip come in 
contact with any object.
WARNING! Kickback may occur when 
the nose or tip of the guide bar touches 
an object, and cause a lightning fast 
reverse reaction, kicking the guide bar up 
and towards the operator. May cause 
serious personal injury. 
 
Decompression v
 
alve:
 
 The valve is to 
reduce the pressure in the cylinder and 
make starting easier. You should always 
use the decompression valve when 
starting the machine.
 
Ignition;
 
 choke:
 
 Set the choke control 
in the choke position. This should 
automatically set the stop switch to the 
start position.
 
Air purge
 
Adjustment of the oil pump
If your machine bears this symbol 
it is equipped with a catalytic 
converter.
Chain brake, activated (right) 
Chain brake, not activated 
(left)
 
Other symbols/decals on 
 
the machine refer to special 
certification requirements 
for certain markets.
 
 
 
 
 
 
 
 
Symbols in the operator’s 
manual:
 
Switch off the engine b
 
y moving the 
stop switch to the STOP position 
before carrying out any checks or 
maintenance.
 
Always wear approved protective 
gloves.
 
Regular cleaning is required.
 
Visual check.
 
Protective goggles or a visor must 
be worn.
 
Refuelling.
 
Filling with oil and adjusting oil flow.
The engine exhaust from this product
contains chemical known to the State
of California to cause cancer, birth
defects or other reproductive harm.