Husqvarna K 750 用户手册

SpeedMill   9

  

Rotate Pipe and repeat this cut-

ting process until pipe circum-

ference is cut.

HOLD MACHINE ONLY at front and rear handles!
NEVER bevel or cut material while holding the pipe with 

your hands!
DO NOT use blade guard pivot handle as a hand hold 

while operating machine!

  

Align proper SpeedMill Bowl 

with end of pipe, and move 

toward the pipe so that the pipe 

is slightly beveled.  

Note:  The bevel required is 

usually quite small, so do not 

remove excessive pipe mate-

rial.

  

Bevel Pipe:  Position SpeedMill 

Bowl near end of pipe to be 

beveled.  Accelerate power cut-

ter to full throttle.

HOLD MACHINE ONLY at front and rear handles, as shown in 

the above photo.