Husqvarna CS 2159C 用户手册

English

 –

 31

Place the chain saw, with the engine switched off, on a 
stump or other stable surface. Release the front handle 
and let the saw fall by its own weight, rotating around the 
rear handle towards the stump.

Place the chain saw on firm ground and start it. Make sure 
the chain does not touch the ground or any other object. 
See the instructions under the heading Start and stop.

Grasp the chain saw firmly, wrapping your fingers and 
thumbs around the handles.

Apply full throttle and activate the chain brake by tilting 
your left wrist forward onto the front hand guard. Do not 
let go of the front handle. The chain should stop 
immediately.

•

Make sure the throttle control is locked at the idle 
setting when the throttle lockout is released.

•

Press the throttle lockout and make sure it returns to 
its original position when you release it.

•

Check that the throttle control and throttle lockout 
move freely and that the return springs work properly.

•

Start the chain saw and apply full throttle. Release the 
throttle control and check that the chain stops and 
remains stationary. If the chain rotates when the 
throttle control is in the idle position you should check 
the carburettor idle adjustment.