Husqvarna 385XP 用户手册

English

 – 33

•

Check that the throttle control and throttle lock move freely 
and that the return springs work properly.

•

Start the chain saw and apply full throttle. Release the 
throttle control and check that the chain stops and 
remains stationary. If the chain rotates when the throttle 
control is in the idle position you should check the 
carburettor idle adjustment.

Check that the chain catcher is not damaged and is firmly 
attached to the body of the chain saw.

Check that the right hand guard is not damaged and that there 
are no visible defects, such as cracks.

Regularly check the vibration damping units for cracks or 
deformation.

Make sure the vibration damping units are securely attached 
to the engine unit and handle unit.

Start the engine and make sure the engine stops when you 
move the stop switch to the stop setting.

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the 
machine.

Some mufflers are equipped with a special spark arrestor 
mesh. If your machine has this type of muffler, you should 
clean the mesh at least once a week. This is best done with a 
wire brush. A blocked mesh will cause the engine to overheat 
and may lead to serious damage.