Husqvarna 3120XP 用户手册
English
– 35
TECHNICAL DATA
Recommended original and replacement bar and chain combinations
This Husqvarna chain saw model is in the ANSI category of saws above 3,8 cu. in. and is not required to comply with low kickback
performance requirements. However, for this model we recommend the following cutting equipment. The combinations of power
head, bar and chain have been investigated in accordance with the kickback and vibration requirements of ANSI B 175.1–1991.
performance requirements. However, for this model we recommend the following cutting equipment. The combinations of power
head, bar and chain have been investigated in accordance with the kickback and vibration requirements of ANSI B 175.1–1991.
WARNING! This chain saw model is capable of severe kickback that could result in serious injuries to the user. Do not operate this
saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Saws with
significantly reduced kickback potential are available. Always use the safest saw and cutting equipment applicable to your cutting
need.
saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Saws with
significantly reduced kickback potential are available. Always use the safest saw and cutting equipment applicable to your cutting
need.
Listed ATL is the Oregon designation of Armour Tip Large hard nose bar.
Bar
Chain
Length, inches
Pitch, inch
Max nose radius
24-42
0,404
ATL 1,65”
Husqvarna H64, Oregon 27
1
5
5
L