Husqvarna 115 13 81-26 用户手册

English

 –

 33

115 13 81-26 Rev.3 2009-01-14

Check that the chain catcher is not damaged and is firmly 
attached to the body of the chain saw.

Check that the right hand guard is not damaged and that 
there are no visible defects, such as cracks.

Regularly check the vibration damping units for cracks or 
deformation.

Make sure the vibration damping units are securely 
attached to the engine unit and handle unit.

Start the engine and make sure the engine stops when 
you move the stop switch to the stop setting.

CAUTION! The start/stop switch automatically returns to 
run position. In order to prevent unintentional starting, the 
spark plug cap must be removed from the spark plug 
when assembling, checking and/or performing 
maintenance. 

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to 
the machine.

Some mufflers are equipped with a special spark arrestor 
mesh. If your machine has this type of muffler, you should 
clean the mesh at least once a week. This is best done 
with a wire brush. A blocked mesh will cause the engine 
to overheat and may lead to serious damage.

Note! The mesh must be replaced if it is damaged. If the 
mesh is blocked the machine will overheat and this will 
cause damage to the cylinder and piston. Never use a 
machine with a muffler that is in poor condition. Never