Husqvarna T435 用户手册

28 – English

Position yourself so that you will be clear of the tree or 
branch when the tension is released.

Make one or more cuts at or near the point of maximum 
tension. Make as many cuts of sufficient depth as 
necessary to reduce the tension and make the tree or 
branch break at the point of maximum tension.

The word kickback is used to describe the sudden 
reaction that causes the chain saw and bar to jump off an 
object when the upper quadrant of the tip of the bar, 
known as the kickback zone, touches an object.

Kickback always occurs in the cutting plane of the bar. 
Normally the chain saw and bar are thrown backwards 
and upwards towards the user. However, the chain saw 
may move in a different direction depending on the way it 
was being used when the kickback zone of the bar 
touched the object.

Kickback only occurs if the kickback zone of the bar 
touches an object.

See instructions under the heading Basic cutting 
technique.