Husqvarna 327P5X-series 用户手册

24 – English

•

Do not work with the shaft held straight out in front of 
you (like a fishing rod) as this increases the apparent 
weight of the cutting attachment.

•

Cut large branches in sections so that you have better 
control over where they fall.

•

Never cut through the swelling at the root of the 
branch as this will slow down healing and increase the 
risk of fungal attack!

•

Use the stop at the base of the cutting head to provide 
support during cutting. This will help prevent the 
cutting attachment from ”jumping” on the branch.

•

Make an initial cut on the underside of the branch 
before cutting through the branch. This will prevent 
tearing of the bark, which could lead to slow healing 

and cause permanent damage to the tree. The cut 
should not be deeper than 1/3 of the branch thickness 
to prevent jamming. Keep the chain running while you 
withdraw the cutting attachment from the branch to 
prevent it jamming.

•

Use the harness to support the weight of the machine 
and make it easier to handle.

•

Make sure you have a firm footing and that you can 
work without being hampered by branches, stones 
and trees.