Husqvarna 1151439-95 用户手册
2
–
English
KEY
T
O SYMBOLS
Symbols on the mac
hine:
W
ARNING! Chain saws can be dangerous!
Careless or improper use can result in serious
or fatal injury to the operator or others.
or fatal injury to the operator or others.
Please read the operator’s manual carefully and
make sure you understand the instructions
before using the machine.
make sure you understand the instructions
before using the machine.
Always wear:
•
Approved protective helmet
•
Approved hearing protection
•
Protective goggles or a visor
Both of the operator
′
s hands must be used to
operate the chain saw.
Never operate a chain saw holding it with one
hand only.
hand only.
Never let the guide bar tip come in contact with
any object.
any object.
WARNING! Kickback may occur when the nose
or tip of the guide bar touches an object, and
cause a lightning fast reverse reaction, kicking
the guide bar up and towards the operator. May
cause serious personal injury.
or tip of the guide bar touches an object, and
cause a lightning fast reverse reaction, kicking
the guide bar up and towards the operator. May
cause serious personal injury.
Other symbols/decals on the mac
hine refer to special
certification requirements for certain markets.
Symbols in the operator’
s manual:
Switch off the engine b
y moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
out any checks or maintenance.
Working position
Choke
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
Refuelling.
Filing with oil and adjusting oil flow.
The chain brake must be engaged when the
chain saw is started.
chain saw is started.
WARNING! Kickback may occur when the
nose or tip of the guide bar touches an object,
and cause a lightning fast reverse reaction,
kicking the guide bar up and towards the
operator. May cause serious personal injury.
nose or tip of the guide bar touches an object,
and cause a lightning fast reverse reaction,
kicking the guide bar up and towards the
operator. May cause serious personal injury.
You will find the following labels on your chain saw:
EP
A III
The Emissions Compliance P
eriod referred to on the
Emission Compliance label indicates the number of operating
hours for which the engine has been shown to meet Federal
and Californian emissions requirements.
hours for which the engine has been shown to meet Federal
and Californian emissions requirements.
Maintenance, replacement, or repair of the emission control
devices and system may be performed by any nonroad
engine repair establishment or individual.
devices and system may be performed by any nonroad
engine repair establishment or individual.
The engine exhaust from this product
contains chemical known to the State
of California to cause cancer, birth
defects or other reproductive harm.