Husqvarna 1153179-26 用户手册

English

 –

 35

Start the engine and make sure the engine stops when 
you move the stop switch to the stop setting.

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to 
the machine.

Some mufflers are equipped with a special spark arrestor 
mesh. If your machine has this type of muffler, you should 
clean the mesh at least once a week. This is best done 
with a wire brush. A blocked mesh will cause the engine 
to overheat and may lead to serious damage.

Note! The mesh must be replaced if it is damaged. If the 
mesh is blocked the machine will overheat and this will 
cause damage to the cylinder and piston. Never use a 
machine with a muffler that is in poor condition. Never 

The muffler is designed to reduce the noise level and to direct 
the exhaust gases away from the operator. The exhaust 
gases are hot and can contain sparks, which may cause fire 
if directed against dry and combustible material.

A muffler equipped with a catalytic converter significantly 
reduces the amount of hydrocarbons (HC), nitrogen 
oxides (NO) and aldehydes in the exhaust fumes. Carbon 
monoxide (CO), which is poisonous and odourless, is not 
however reduced! Consequently, never work in an 
enclosed or badly ventilated area. Good air circulation 
should always prevail when working in snowy hollows, 
ravines or in confined conditions.

•

Loosen the screws that hold the starter against the 
crankcase and remove the starter.