Husqvarna 1151187-95 用户手册

English

 –

 19

Place the locking pin in the groove on the screw head 
and tighten. See diagram.

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive 
disc aligns with the corresponding hole in the gear 
housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse 
order.

At the front is an easily accessible, quick release. Use this 
if the engine catches fire or in any other emergency 
situation that requires you to free yourself from the 
machine and harness.

A well-adjusted harness and machine makes work much 
easier. Adjust the harness for the best working position. 
Tension the side straps so that the weight is evenly 
distributed across both shoulders.

1

Adjust the support strap so that the support hook is 
around 10 cm below your hip. The blade should be 
angled forward a little.

2

The support hook should hang around 20 cm below 
your hip so that the blade is parallel to the ground.

1

Move the suspension ring on the machine forward or 
backward. It is easier to avoid sawing into the ground 
if the blade is balanced a few dm above the ground.

2

Let the blade balance at a comfortable cutting height, 
i.e. close to the ground.