Husqvarna 1151002-95 用户手册

下载
页码 45
STARTING AND STOPPING
20 – English
throttle latch in order to avoid unnecessery wear on the 
clutch assembly.
CAUTION! Do not pull the starter cord all the way out and 
do not let go of the starter handle when the cord is fully 
extended. This can damage the machine.
Note! Pull the front hand guard towards the front handle. 
The chain brake is now disengaged. Your saw is ready for 
use.
Never start a chain saw unless the bar, chain and all 
covers are fitted correctly. See instructions under the 
heading Assembly. Without a bar and chain attached 
to the chain saw the clutch can come loose and cause 
serious injury.
The chain brake should be activated when starting. Se 
instructions under the heading Start and stop. Do not 
drop start. This method is very dangerous because 
you may lose control of the saw.
Never start the machine indoors. Exhaust fumes can 
be dangerous if inhaled.
Observe your surroundings and make sure that there 
is no risk of people or animals coming into contact with 
the cutting equipment.
Always hold the saw with both hands. The right hand 
should be on the rear handle, and the left hand on the 
front handle. All people, whether right or left handed, 
should use this grip. Use a firm grip with thumbs and 
fingers encircling the chain saw handles.
Stopping
The engine is stopped by pushing the stop switch to the 
stop position.
!
WARNING! Long term inhalation of the 
engine’s exhaust fumes, chain oil mist 
and dust from sawdust can represent a 
health risk.