Husqvarna 1151002-95 用户手册
English – 37
MAINTENANCE
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the
Maintenance section.
Maintenance section.
Daily maintenance
Weekly maintenance
Monthly maintenance
Clean the outside of the machine.
On chain saws without a catalytic
converter, check the cooling system
weekly.
converter, check the cooling system
weekly.
Check the brake band on the chain
brake for wear. Replace when less than
0.024 inch (0.6 mm) remains at the most
worn point.
brake for wear. Replace when less than
0.024 inch (0.6 mm) remains at the most
worn point.
Check that the components of the
throttle control work safely. (Throttle
lockout and throttle control.)
throttle control work safely. (Throttle
lockout and throttle control.)
Check the starter, starter cord and
return spring.
return spring.
Check the clutch centre, clutch drum
and clutch spring for wear.
and clutch spring for wear.
Clean the chain brake and check that
it operates safely. Make sure that the
chain catcher is undamaged, and
replace it if necessary.
it operates safely. Make sure that the
chain catcher is undamaged, and
replace it if necessary.
Check that the vibration damping
elements are not damaged.
elements are not damaged.
Clean the spark plug. Check that the
electrode gap is 0.020 inch (0.5 mm).
electrode gap is 0.020 inch (0.5 mm).
The bar should be turned daily for
more even wear. Check the
lubrication hole in the bar, to be sure
it is not clogged. Clean the bar
groove. If the bar has a sprocket tip,
this should be lubricated.
more even wear. Check the
lubrication hole in the bar, to be sure
it is not clogged. Clean the bar
groove. If the bar has a sprocket tip,
this should be lubricated.
Lubricate the clutch drum bearing.
Clean the outside of the carburetor.
Check that the bar and chain are
getting sufficient oil.
getting sufficient oil.
File off any burrs from the edges of
the bar.
the bar.
Check fuel hose for cracks or other
damage. Change if necessary.
damage. Change if necessary.
Check the saw chain with regard to
visible cracks in the rivets and links,
whether the saw chain is stiff or
whether the rivets and links are
abnormally worn. Replace if
necessary.
visible cracks in the rivets and links,
whether the saw chain is stiff or
whether the rivets and links are
abnormally worn. Replace if
necessary.
Clean or replace the spark arrestor
screen on the muffler.
screen on the muffler.
Empty the fuel tank and clean the inside.
Sharpen the chain and check its
tension and condition. Check the
drive sprocket for excessive wear
and replace if necessary.
tension and condition. Check the
drive sprocket for excessive wear
and replace if necessary.
Clean the carburetor compartment.
Empty the oil tank and clean the inside.
Clean the starter units air intake.
Clean the air filter. Replace if
necessary.
necessary.
Check all cables and connections.
Check that nuts and screws are tight.
Check that the stop switch works
correctly.
correctly.
Check that there are no fuel leaks
from the engine, tank or fuel lines.
from the engine, tank or fuel lines.
On chain saws with a catalytic
converter, check the cooling system
daily.
converter, check the cooling system
daily.