Husqvarna 525RK 用户手册

12 – English

•

Remove the screw at the rear of the throttle handle.

•

Slide the throttle handle onto the right side of the 
handlebar, (see diagram).

•

Align the screw hole in the throttle handle with the hole 
in the handlebar.

•

Refit the screw in the hole in the rear of the throttle 
handle.

•

Screw the screw through the handle and handlebar. 
Tighten it.

•

Unscrew the knob from the handlebar mounting.

•

Position the handlebar as shown. Fit the mounting 
components and tighten the knob lightly.

•

Put on the harness and hang the machine from the 
support hook. Now make a final adjustment so that 
the machine is in a comfortable working position when 
it hangs from the harness. Tighten the knob. 

•

Loosen the coupling by turning the knob.

•

Align the tab of the attachment (A) with the arrow on 
the coupling (B).

•

Push the attachment into the coupling until the 
attachment snaps into place.

•

Before using the unit, tighten the knob securely.

A

B