Husqvarna GR41 用户手册

English

 – 9

This guard is intended to prevent loose objects from being 
thrown towards the operator. The guard also protects the 
operator from accidental contact with the cutting attachment.

Check that the guard is undamaged and not cracked. Replace 
the guard if it has been exposed to impact or is cracked.

Always use the recommended guard for the cutting 
attachment you are using. See chapter on Technical data.

Your machine is equipped with a vibration damping system 
that is designed to minimize vibration and make operation 
easier.

Use of incorrectly wound cord or an incorrect cutting 
attachment increases the level of vibration. See instructions 
under the heading Cutting equipment.

The machine

′s vibration damping system reduces the transfer 

of vibration between the engine unit/cutting equipment and 
the machine

′s handle unit.

Regularly check the vibration damping units for cracks or 
deformation. Check that the vibration damping element is 
undamaged and securely attached.

There is an easily accessible, quick release fitted at the front 
as a safety precaution in case the engine catches fire, or in 
any other situation that requires you to free yourself from the 
machine and harness. See instructions under the heading 
Adjusting the harness and clearing saw. Certain harnesses 
also have a quick release fitted to the support hook.

Check that the harness straps are correctly positioned. Once 
the harness and machine have been adjusted, check that the 
harness quick release works correctly.

The muffler is designed to keep noise levels to a minimum 
and to direct exhaust fumes away from the user. A muffler 
fitted with a catalytic converter is also designed to reduce 
harmful exhaust gases.

In countries that have a warm and dry climate there is a 
significant risk of fire. We therefore fit certain mufflers with a 
spark arrestor mesh. Check whether the muffler on your 
machine is fitted with this kind of mesh.