Husqvarna K3600 MKII 用户手册

English

 – 13

CAUTION! The machine should be upright. If the machine 
lies on its side the weight of the blade makes it difficult to 
make a correct adjustment.

•

Tighten the knobs fully and the machine is ready to use.

•

Before connecting the hoses: Ensure that the couplings 
are clean, both on the machine and the hoses.

•

Connect the pressure hose (A) from the hydraulic system 
to the female coupling on the machine.

•

Connect the other hydraulic coupling (B) to the male 
coupling. This hose leads oil back to the container.

CAUTION!  Two hose kits can be connected when hose 
lengths exceeding 18 m are required. Do not connect more 
than two kits as the couplings cause large power loss. See the 
Technical data.

CAUTION!  Make sure that the hoses can not be loosened 
accidentally by turning the safety catches on the couplings to 
the locked position before using the machine.

Connect the water hose to the water supply. The water flow is 
activated by opening the check valve. Minimum water flow: 4 
l/min Note that the machine’s hose nipple is fitted with a filter.

When you press in the switch lock (A) the water valve opens.

The water valve remains open and the switch lock (A) remains 
pressed in as long as the switch (B) is held pressed in.

The water flow can be adjusted during operations with your 
thumb.

Ample water flow is needed for maximal blade life.

CAUTION!  The water pressure and water flow is extremely 
important for the blade’s cooling and service life. Inadequate 
cooling shortens the life of the guide rollers, drive wheel and 
the blade.