Husqvarna 345FR 用户手册

18 – English

•

Screw on the trimmer head (H) in the opposite 
direction to the direction of rotation.

•

Tighten the trimmer head to a torque of 35-50 Nm 
(3.5-5 kpm).

•

To dismantle, follow the instructions in the reverse 
order.

•

Fit the trimmer guard/combination guard (A) intended 
for use with the trimmer head/plastic blades. Hang the 
trimmer guard/combination guard (A) on the two 
hooks on the plate holder (M). Bend the guard around 
the shaft and tighten it with the bolt (L) on the opposite 
side of the shaft. Use the locking pin (C). Place the 
locking pin in the groove on the screw head and 
tighten. See diagram.

•

Fit the drive disc (B) on the output shaft.

•

Centre the metal cup (P) on the drive disc’s blade 
guide.

•

Turn the blade shaft until one of the holes in the drive 
disc aligns with the corresponding hole in the gear 
housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse 
order.

Push down the red release lever to release the machine 
from the harness.

1

Tighten the hip strap so that it sits securely.

2

Tighten the chest strap under your left arm so that it 
fits closely around your body.