Husqvarna 143R-II 用户手册

English

 –

 19

Primer bulb: Press the air purge repeatedly until fuel 
begins to fill the bulb. The bulb need not be completely 
filled. 

Choke: Set the choke control in the choke position. 

(1) Choke control

(2) Choke position

(3) Open position

Hold the body of the machine on the ground using your 
left hand (CAUTION! Not with your foot!). Grip the starter 
handle, slowly pull out the cord with your right hand until 
you feel some resistance (the starter pawls grip), now 
quickly and powerfully pull the cord. Never twist the 
starter cord around your hand.

Repeat pulling the cord until the engine starts. When the 
engine starts. return choke control to run position and 
apply full throttle; the throttle will automatically disengage 
from the start setting.

CAUTION!  Do not pull the starter cord all the way out and 
do not let go of the starter handle when the cord is fully 
extended. This can damage the machine.

CAUTION!  Do not put any part of your body in marked 
area. Contact can result in burns to the skin, or electrical 

shock if the spark plug cap has been damaged. Always 
use gloves. Do not use a machine with damaged spark 
plug cap.

Stop the engine by switching off the ignition.

(A) Stop

(B) Start

(C) Stop switch

(1) Choke control

(2) Choke position

(3) Open position

IMPORTANT! If the engine does not stop when setting 
the ignition switch to the stop position, close the choke 
lever and stop the engine. In this case, please repair the 
machine at your nearest servicing dealer.