Husqvarna 324RX-Series 用户手册
English
– 25
MAINTENANCE
•
See the cutting attachment packaging for correct
sharpening instructions.
sharpening instructions.
•
Sharpen blades and cutters using a single-cut flat file.
•
Sharpen all edges equally to maintain the balance of the
blade.
blade.
Sharpening the saw blade
•
See the cutting attachment packaging for correct
sharpening instructions.
sharpening instructions.
•
A correctly sharpened blade is essential for working
efficiently and to avoid unnecessary wear to the blade and
clearing saw.
efficiently and to avoid unnecessary wear to the blade and
clearing saw.
•
Make sure that the blade is well supported when you file
it. Use a 5.5 mm round file with a file holder.
it. Use a 5.5 mm round file with a file holder.
•
The filing angle is 15
°. File alternate teeth to the right and
those in between to the left. If the blade has been heavily
pitted by stones it may be necessary to dress the top
edges of the teeth with a flat file, in exceptional cases. If
so, this should be done before filing with a round file. The
top edges must be filed down by the same amount for all
the teeth.
pitted by stones it may be necessary to dress the top
edges of the teeth with a flat file, in exceptional cases. If
so, this should be done before filing with a round file. The
top edges must be filed down by the same amount for all
the teeth.
•
Adjust the blade setting. This should be 1 mm.
!
WARNING! Always discard a blade that is
bent, twisted, cracked, broken or damaged
in any other way. Never attempt to straighten
a twisted blade so that it can be reused. Only
use original blades of the specified type.
bent, twisted, cracked, broken or damaged
in any other way. Never attempt to straighten
a twisted blade so that it can be reused. Only
use original blades of the specified type.
!
WARNING! Using an incorrect cutting
attachment or an incorrectly sharpened
blade increases the risk of kickback.
attachment or an incorrectly sharpened
blade increases the risk of kickback.