Husqvarna 235F 用户手册

English

 –

 13

•

Remove the screw at the rear of the throttle handle.

•

Slide the throttle handle onto the right side of the 
handlebar, (see diagram).

•

Align the screw hole in the throttle handle with the hole 
in the handlebar.

•

Refit the screw in the hole in the rear of the throttle 
handle.

•

Screw the screw through the handle and handlebar. 
Tighten it.

•

Remove the mounting components from the 
handlebar mounting.

•

Position the handlebar as shown. Fit the mounting 
components and tighten the knob lightly.

•

Fit the wiring as shown.

•

Put on the harness and hang the machine from the 
support hook. Now make a final adjustment so that 
the machine is in a comfortable working position when 
it hangs from the harness. Tighten the knob.

•

The handlebar can easily be turned to fit along the 
shaft for easier transportation and storage.

•

Loosen the knob. Turn the handlebar clockwise so that 
the throttle handle rests against the engine.

•

Now twist the handlebar around the shaft. Tighten the 
knob.

•

Fit the transport guard to the cutting attachment.