Husqvarna 235F 用户手册

16 – English

•

Fit the trimmer guard/combination guard (A) intended 
for use with the trimmer head/plastic blades. 
CAUTION!  Ensure that the guard extension is fitted.

Hang the trimmer guard/combination guard (A) on the 
two hooks on the plate holder (M). Bend the guard 
around the shaft and tighten it with the bolt (L) on the 
opposite side of the shaft. Use the locking pin (C). 
Place the locking pin in the groove on the screw head 
and tighten. See diagram.

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive 
disc aligns with the corresponding hole in the gear 
housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse 
order.

At the front is an easily accessible, quick release. Use this 
if the engine catches fire or in any other emergency 
situation that requires you to free yourself from the 
machine and harness.

A well-adjusted harness and machine makes work much 
easier. Adjust the harness for the best working position. 
Tension the side straps so that the weight is evenly 
distributed across both shoulders.