Husqvarna 324RX 用户手册

English

 –

 21

Choke: Set the choke control in the choke position. 

Primer bulb: Press the air purge repeatedly until fuel begins 
to fill the bulb. The bulb need not be completely filled. 

Ignition: Set the stop switch to the start position.

Choke: Put the choke in working position. 

Primer bulb: Press the air purge repeatedly until fuel begins 
to fill the bulb. The bulb need not be completely filled. 

Set the throttle to the start position by first pressing the 
throttle lockout and the throttle trigger, then pressing the 
start throttle button (A). Then release the throttle lockout and 
the throttle trigger, followed by the start throttle button. The 
throttle function is now activated. To return the engine to idle, 
press the throttle lockout and throttle trigger again.

Hold the body of the machine on the ground using your left 
hand (CAUTION! Not with your foot!). Grip the starter 
handle, slowly pull out the cord with your right hand until you 
feel some resistance (the starter pawls grip), now quickly 
and powerfully pull the cord. Never wrap the starter cord 
around your hand

Repeat pulling the cord until the engine starts. When the 
engine starts. return choke control to run position and apply 
full throttle; the throttle will automatically disengage from the 
start setting.

CAUTION! Do not pull the starter cord all the way out and do 
not let go of the starter handle when the cord is fully 
extended. This can damage the machine.

Stop the engine by switching off the ignition.

O

I

L

O

I

L