Ryobi RY15702 用户手册

6 — English

Blade Cutting Width ..................................................... 8 in.

See Figure 1.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as 
well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating 
features and safety rules.

Weight ................................................................... 3.25 lbs.

This product requires assembly.


  Carefully remove the items from the box. Make sure that 

all items listed in the packing list are included.



  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.



  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.



  If any parts are damaged or missing, please call 

1-800-860-4050 for assistance.

Ryobi

®

 Expand-It

™

 Brushcutter Attachment 

J-Handle Assembly
Shoulder Harness Assembly
Hardware Bag
Gear Head Locking Tool
Operator’s Manual

If any parts are damaged or missing do not operate this 
product until the parts are replaced. Failure to heed this 
warning could result in serious personal injury.

Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any 
such alteration or modification is misuse and could result 
in a hazardous condition leading to possible serious 
personal injury.

Do not connect to power head until assembly is complete. 
Failure to comply could result in accidental starting and 
possible serious personal injury.

Never attach or adjust any attachment while power head 
is running. Failure to stop the engine may cause serious 
personal injury.

The brushcutter attachment connects to the power head by 
means of a coupler device. 


  Remove the hanger cap from the attachment.



  Loosen the knob on the coupler of the power head 

shaft.



  Push in the button located on the brushcutter  attachment. 

Align the button with the guide recess on the extension 
shaft coupler and slide the two shafts together. Rotate 
attachment until button locks into the positioning hole.



  Tighten the knob securely. 

NOTE: If the buttons do not release completely in the 
positioning holes, the shafts are not locked into place. 
Slightly rotate from side to side until the button is locked 
into place.
NOTE: Use only the specified positioning hole for this 
attachment.

Be certain the knob is fully tightened before operating 
equipment. Check it periodically for tightness during use 
to avoid serious injury.

For removing or changing the attachment:


  Stop the engine.



  Loosen the knob.



  Push in the button and twist the shafts to remove and 

separate ends.