Ryobi RY15702 用户手册

9 — English



  Remove the cupped washer and the blade.

  Place flanged washer over the gear shaft with the hollow 

side toward the brushcutter guard.

  Center the blade on the flanged washer, making sure the 

blade fits flat and the raised hub goes through the hole 

in the blade.

  Install the cupped washer with the raised center away 

from the blade.

  Place the blade nut onto the gear shaft.


  Insert the head locking tool through the flanged washer 

and gear head.

  Install the blade nut by turning it counterclockwise (left-

handed threads).

  Tighten the blade nut and torque to 120 in.lb. minimum 

(finger tight plus 1/2 turn).

Go to www.ryobitools.com and register your new tool on-line.

Your product has been fully tested prior to shipment  

to ensure your complete satisfaction.

For any questions about operating or maintaining  

your product, call the Ryobi Help Line!

To register your Ryobi product by regular mail, please print the following information on a 3 in. x 5 in. card or 

standard postcard: your name, mailing address, phone numbers, email address, Ryobi product(s) purchased 

with item number from package, and serial number for each product. Mail the card to: Techtronic Industries 

North America, Inc., Attn. Ryobi Registration, 1428 Pearman Dairy Road, Anderson, SC 29625.To receive infor-

mation on our company and products, please include the following statement on your registration card: “Send 

me information on your products and company using the contact information I am providing with this product 

registration.”

See Figure 9.
There are two ways to hang the attachment for storage.


  To use the hanger cap, push in the button and place the 

hanger cap over the end of the attachment shaft. Slightly 
rotate the cap from side to side until the button locks into 
place.



  The secondary hole in the attachment shaft can be used 

for hanging purposes as well.



  Clean the attachment thoroughly and lubricate before 

storing. 



  Store the attachment in a dry, well-ventilated place that 

is inaccessible to children. 



  Keep away from corrosive agents such as garden chemi-

cals and de-icing salts.