Land Pride RCB6610 用户手册
54
Section 5: Maintenance & Lubrication
RCB6610 & RCBM6610 Series 2 S/N 944730+ Rotary Cutters 330-584M
11/11/12
CV Main Driveline Joints & Shields
CV = Constant Velocity
Type of Lubrication: Multi-purpose Grease
For instructions on how to access grease zerks shown
in Figure 5-16, see “Accessing CV Driveline Joints”
on page 55.
in Figure 5-16, see “Accessing CV Driveline Joints”
on page 55.
•
The constant velocity joint should be greased in a
straight position forcing grease through the passages
and into the cavity. After lubrication, grease should
be visible around the ball joints.
straight position forcing grease through the passages
and into the cavity. After lubrication, grease should
be visible around the ball joints.
•
Grease fittings located on the u-joints and driveline
shields should be lubricated every 8 hours of
operation.
shields should be lubricated every 8 hours of
operation.
CV Main Driveline Profile Tubes
CV = Constant Velocity
Type of Lubrication: Multi-purpose Grease
Quantity = Coat Generously
8
Hours
8
Hours
CV Drivelines with external grease point for Profile Tube
CV Drivelines with internal grease point for Profile Tube
23556
8-10 pumps
Zerk Located through slot in tube
23565
Zerk Located on end of tube
CV Drivelines with external grease point for Profile Tube
Figure 5-16
CV Drivelines with internal grease point for Profile Tube
Figure 5-17
23556
4-5 pumps
2-3 pumps
2-3 pumps
4-6 pumps
23565
Access Zerk through hole in shield