RedMax HBZ2601 用户手册

Attach the adequate accessories, respectively for
blower operation and dust-collecting operation.

• Use the gloves during operation.
• In adjustment of the blower/dust collector or in other

types of operation, be sure to stop the engine and
detach the spark plug cap.

• Never start operation unless this machine is

completely assembled.

■ MOUNTING THE DUST-COLLECTING KIT
1) Installing Support Handle (OPT1)

• This handle is supplied with the blower.
• Fit the holes of volute and handle, tighten the

screws.

• Be sure to tighten the screws straightly.

1. Fit the extension pipe (1) groove with main unit

port projection, turn to mount the pipe to the main
unit.

2. Tighten the clamp screw (2) securely.

1. Loosen the screw (3), and open the suction port

cover.

2. Align the 

(5) indicated on the vacuum pipe

(4) with the 

indicated on the blower. Then

insert the vacuum pipe (4) into the blower.

3. Turn the vacuum pipe (4) until the 

(5) is

aligned with the 

indicated on the blower to

lock the vacuum pipe.

Hold the bottom of the vacuum pipe when turning the
vacuum pipe to install or remove it.