Husqvarna 2009-01 用户手册

11

1.  Position upper chute support against bagger inlet, 

fl ush at outer edges. See Illustration.

2.  Using support as a template, drill two 

3

/

8

 holes into 

bagger hood.

Upper Chute Support

Bagger Inlet

Nut

Bagger Hood

Flat Washers

Hex Bolt

Flex Trim

3.  Secure upper chute support to hood with hex 

bolts, washers and nyloc nuts.

ASSEMBLY

3½ Bolt

Weight Bracket

Weight Assembly

1.  Bolt cast weight to weight brackets using 

bolts and four nuts.

2.  Slide both weight brackets over the front tube on 

the frame. Be sure to position the weight assembly 
in the center of the frame.

3. Secure 

with 

-16 x 3½ bolts and four nuts.

Front Tube

3" Bolt

NOTE: Assistance from another person may ease 
mounting the cover assembly to mower.

1.  Lift and rotate cover to align the cover brackets 

with support assembly tubes.

2.  Slide the cover down over the support tubes until 

secure.