Servis-Rhino 1480 用户手册
OPERATION
1480/1485/1495 01/11
Operation Section 4-42
© 2011 Alamo Group Inc.
OPERA
T
ION
TROUBLE
POSSIBLE CAUSE
POSSIBLE REMEDY
Excessive wear on
Bucket is riding on cutting
Use boom “FLOAT” position or
cutting edge
edge instead of wear runners.
bucket level indicator to ensure
bucket rides on wear runners.
Bucket cutting edge
Rear axle on tractor not level
With tractor on level surface,
not flat on the ground.
from side to side.
compare rear axle height from left
to right, measuring from axle center
to ground. Adjust air pressure in rear
tires until axle height measures the
same for both sides.
to right, measuring from axle center
to ground. Adjust air pressure in rear
tires until axle height measures the
same for both sides.