Snapper 1721301-02 用户手册

16

Removing &
Attaching the Hitch & Blade

1. Lower the blade.  Put the lift lever in the middle notch

(float position).

2. Remove the hair pin clip and washer (D, Figure 24)

securing the angling control rod to the clevis.
Disconnect the angling control rod.

3. Remove the angling control rod from the 

support arm (A).

4. Remove the pivot pin (C) connecting the blade and

pushbar.  Remove the blade.

5. Raise the push bar and remove pin (E) securing the

chain to the hitch bracket. 

6. Lower the lift and remove the pins (B) securing the lift

rod to the push bar and lift rod.

7. Remove the pins (F) securing the push bar to the

tractor hitch.

8. Reinstall all pins for storage.

Install in reverse order of removal.