Husqvarna YTH2014 Twin 用户手册

下载
页码 44
5
UNASSEMBLED PARTS
(2) Keys
Slope Sheet
Key
(1) Oil Drain Tube 
ASSEMBLY
When right or left hand is mentioned in this man ual, it means 
when you are in the operating po si tion (seated be hind the 
steer ing wheel).
TO REMOVE TRACTOR  FROM    
CAR TON
UNPACK CARTON
•  Remove all accessible loose parts and parts cartons  
from carton.
•  Cut along dashed lines on all four panels of carton. 
Remove end panels and lay side panels flat.
•  Check for any additional loose parts or cartons and 
remove.
Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes.
FIG. 1
02931
CHECK BATTERY (See Fig. 1)
•  Lift hood to raised position.
NOTE: If this battery is put into service after month and year 
indicated on label (L) (label is located between terminals) 
charge battery for minimum of one hour at 6-10 amps. 
(See "BATTERY" in Maintenance  section of this manual 
for charging instructions).
L
FIG. 2
ADJUST SEAT (See Fig. 2)
•  Sit in seat.
• 
Lift up adjustment lever (A) and slide seat until a com-
fortable position is reached which allows you to press 
clutch/brake pedal all the way down.
•  Release lever to lock seat in position.
NOTE: You may now roll your tractor off the skid. Follow the 
instructions below to remove the tractor from the skid.
  WARNING: Before start ing, read, un der stand and fol low 
all in struc tions in the Op er a tion section of this man u al. Be 
sure tractor is in a well-ventilated area. Be sure the area in  
front of tractor is clear of other peo ple and objects.
A