Kompernass KH 4168 用户手册
- 2 -
Technical data
Mains plug:
Input voltage :
Input voltage :
230 V ~ 50Hz
Output voltage:
24 V ~
Output level:
5 VA
Protection Class:
IP 44
Protection class:
II /
Number of bulbs:
25 bulbs
Bulb type:
2 V / 0,136 W
Lamp spacing:
10 cm
Light string length:
11 M
Items supplied
String of Lights
Connector power pack
5 Replacement bulbs
Tool for the exchange of bulbs
Operating instructions
Connector power pack
5 Replacement bulbs
Tool for the exchange of bulbs
Operating instructions
Appliance description
q
Connector power pack
w
Connector plug
e
Retainer nut
r
Bulb
t
Pinned plug
y
Pinned socket
Utilisation
• Check to ensure that the string of lights is unda-
maged and all parts and remnants of the packa-
ging are removed from it.
ging are removed from it.
• Check to ensure that every pinned socket con-
tains a bulb. If not, insert replacement bulbs.
• Insert the connector plug
w
into the connector
power pack
q
.
• Push the retainer nut
e
over it and screw it tight.
• Drape the string of lights over the object to be
decorated.
• Insert the plug of the connector power pack
q
into a wall socket to take the string of lights into
use.
use.
• If the string of lights does not emit light:
Check that each individual bulb
r
is sitting firm-
ly in its pinned socket
y
and the plug of the po-
wer pack
q
is firmly held in the wall socket.
• Should individual lamps not emit light:
Replace them as described in the following.
Changing bulbs
Risk of personal injury!
• First, remove the connector power pack
q
from
the wall socket. The string of lights is "live" for as
long as the connector power pack
long as the connector power pack
q
is connected
to the power source. Risk of electrical shock!
• After immediate use, first allow the bulb to cool
down. Risk of Burns!
Caution:
The bulbs have a pinned socket, not a threaded socket!
Do not attempt to screw the bulbs out and do not
use any tools. If you do, the bulb glass could splinter.
Do not attempt to screw the bulbs out and do not
use any tools. If you do, the bulb glass could splinter.
Risk of injury!
• Remove the bulb
r
together with the pinned
plug
t
from the pinned socket
y
.
• For replacements, only use the type of bulb de-
tailed in the technical data. Using more power-
ful bulbs, or those with different wattages, could
lead to the other bulbs becoming too hot or to
an overload of the power cable.
ful bulbs, or those with different wattages, could
lead to the other bulbs becoming too hot or to
an overload of the power cable.
• Insert the new bulb
r
complete with its pinned
plug
t
into the pinned socket
y
. The pinned
plug
t
is at the lead, thus the bulb cannot be
incorrectly inserted.
IB_KH4168_BK2191_LB3.qxd 03.04.2008 12:15 Uhr Seite 2