Kompernass KH4218 用户手册

- 3 -

Setting up the illuminated Figure

Take the Illuminated Figure from its

packaging.
Remove all transportation fasteners and

tapes/foils.
Place the Illuminated Figure on a

suitable surface.
Carefully pull the two wire elements apart,

on the Christmas tree figure (KH4222)

and the Snowman figure (KH4220),

so that the figures can stand alone.
If necessary, secure the illuminated figures

to the ground with the supplied ground

spikes.
Connect the Illuminated Figure with

a correctly installed 230 V domestic

power wall socket.
When you wish to turn off the illumina-

tion function of the Illuminated Figure,

remove the plug from the wall socket.
During the periods in which the Illumi-

nated Figure will not be in use, please

store it in its packaging.

Cleaning and Care

Risk of potentially fatal

electrical shock:

First remove the plug from the power

•

socket.

NEVER submerse the Illuminated Figure

•

in water or other fluids!

Do not allow any liquids to permeate

•

into the Illuminated Figure.

Before you start cleaning it, allow the Illu-

minated Figure to cool down if need be.

Cleaning the Rope Light:

Clean the rope light with a lightly mois-

tened cloth. NEVER use petrol, solvents

or detergents that can damage plastics!

Maintenance

The illuminated figure contains no parts

•

that can be serviced by the consumer.

Disposal

Do not dispose of the device in

your normal domestic waste.

This device is subject to the European

Guidelines 2002/96/EC.

Dispose of the appliance through an

•

approved disposal centre or at your

community waste facility.

Observe the currently applicable regu-

•

lations. In case of doubt contact your

disposal facility.

Dispose of all packaging materials

in an environmentally friendly

manner.

IB_KH4218_23_32998_LB6.indd 3

18.06.2009 8:37:51 Uhr