Snapper LT-125 用户手册

下载
页码 76
Check Mower Blade Stopping Time 
Mower blades and mower drive belt should come to a com-
plete stop within fi ve seconds after the electric PTO switch 
is turned off. 
 1.  With tractor in neutral, PTO disengaged and operator in 
seat, start the engine.
 2.  Look over the left-hand footrest at the mower drive belt. 
Engage the PTO and wait several seconds. Disengage 
the PTO and check the amount of time it takes for the 
mower drive belt to stop.
 3.  If mower drive belt does not stop within fi ve seconds, 
see an authorized dealer.
Check Tire Pressure
Tire pressure should be checked periodically, and maintained 
at the levels shown in the chart. Note that these pressures may 
differ slightly from the “Max Infl ation” stamped on the side-wall 
of the tires. The pressures shown provide proper traction, im-
prove cut quality, and extend tire life.
Size
PSI
bar
15 x 6.0-6
12-14
0,82-0,96 
20 x 10.0-8
10-12
0,68-0,82
Maintenance Chart
TRACTOR AND MOWER
Every 8 Hours or Daily
   Check safety interlock system
   Clean debris off  tractor and mower deck
   Clean debris from engine compartment
Every 25 Hours or Annually *
   Check mower blade stopping time
   Check tractor and mower for loose hardware
   Check tire pressure
Every 50 Hours or Annually *
   Check tractor brakes
   Clean battery and cables
See Dealer Annually to
   Lubricate tractor and mower
   Check mower blades **
 *  Whichever comes fi rst
 **  Check blades more often in regions with sandy soils or 
high dust conditions.
ENGINE
First 5 Hours
   Change engine oil - see engine manual
Every 8 Hours or Daily
   Check engine oil level - see engine manual
Every 25 Hours or Annually *
   Clean engine air fi lter and pre-cleaner **
Every 50 Hours or Annually *
   Change engine oil
   Replace oil fi lter
Annually
   Replace air fi lter
   Replace pre-cleaner
See Dealer Annually to
   Inspect muffl  er and spark arrester
   Replace spark plug
   Replace fuel fi lter
   Clean engine air cooling system
 *   Whichever comes fi rst
 **  Clean more often in dusty conditions or when airborne 
debris is present.
OPERATION
20
Not 
for  
Reproduction