Walker DSD74 用户手册

60

Use only genuine Walker

 replacement parts.

Effective Date 08-01-08

Heavy Duty Gear Drive Assemblies DSD, DGHS, DML42A
Item # 1 applies to all Heavy Duty deck models EXCEPT DSD52
and DSD62.

1

Apply Loctite

 Threadlocker # 277 (Red) to Item # 1 used 

on Heavy Duty Gearbox Connector Tubes.  Torque to 
115 in-lb (13.0 N

·

m).

DGHS & DSD Deck Assemblies
Items # 2 & 3 apply to all deck models EXCEPT DSD52 and
DSD62.

2

Apply Loctite

 Threadlocker # 242 (Blue) to P/N F211 

(1/4-20 x 7/8 Hex Bolt, used on Gearbox Connector Tubes) 
prior to assembly. Torque to 90 in-lb (10.2 N

·

m).

3

Torque P/N F018 (5/8-18 Hex Nut, used on underside of 
blades) to 60 ft-lb (81.4 N

·

m). DO NOT apply Loctite

.

4

Apply Loctite

 Threadlocker # 242 (Blue) to P/N F114

(5/16-18 x 5/8 SQH Set Screw, used on Drive Pulley) prior 
to assembly. Torque to 190 in-lb (21.5 N

·

m).

5

Apply Loctite

 Threadlocker # 242 (Blue) to P/N F076

(3/8-16 x 5/8 SQH Set Screw, used on U-Joint Shaft Assy, 
T-Scope) prior to assembly. Torque to 400 in-lb (45.2 N

·

m).

6

Torque P/N F339 (5/16-18 x 3/4 Self-Tapping Bolt, used
on Mount Braket & PTO Guard) to 200 in-lb (22.6 N

·

m).

DO NOT apply Loctite

.

7

Apply Loctite

 Threadlocker # 242 (Blue) to P/N F226

(5/16-18 x 7/8 Hex Bolt, used on Right Angle Gearbox)
prior to assembly. Torque to 18 ft-lb (24.4 N

·

m).

NOTE: Models DGHS48 and DSD52 are shown here. Refer to

individual deck assemblies for exact locations and quanti-
ties of items listed above.