Tiger Products Co., Ltd 5101E 用户手册

Assembly Section 2-17

For all tractors using a boom mower, a wheel weight will be required for the rear left 

side wheel.  It will be necessary to mount the weight in the wheel using the long 
capscrews, lockwashers, flatwashers, spacers (if applicable), and hex nuts per the 
diagram in the parts section.

Installation is most easily done with a fork lift, inserting a fork in the center slot of the 

wheel weight.  The head of the capscrews is to be toward the OUTSIDE of the weight, 
with flatwashers on both the inside and outside of the assembly.

The left rear tire may also be filled with a mixture of water and calcium chloride at 

about five pounds per gallon.  Tire air pressure should be maintained according to the 
Maintenance Section. 

Carefully lower the boom rest and align the boss’ with the holes of the axle brace.  

Now install all attaching hardware as shown in the parts section loosely, to allow for the 
alignment.  Tighten / torque all hardware on the axle brace and the boom rest.  Finally, 
add the Boomrest Plate with the hardware provided so it lines up with the boom in the 
rear stowing position.