McCulloch MC1236STA 用户手册
7
ASSEMBLY
FIG. 2
2466
SEAT PAN
SHOULDER
BOLT
BOLT
SEAT
ADJUSTMENT
BOLT
BOLT
LOCK WASHER
02465
FLAT WASHER
02602
HOW TO SET UP YOUR TRACTOR
CONNECT BATTERY (See Figs. 3 and 4)
CAUTION: Do not short battery termi-
nals by allowing a wrench or any other
object to contact both terminals at the
same time. Before connecting battery,
remove metal bracelets, wristwatch
bands, rings, etc.
nals by allowing a wrench or any other
object to contact both terminals at the
same time. Before connecting battery,
remove metal bracelets, wristwatch
bands, rings, etc.
Positive terminal must be connected
fi rst to prevent sparking from accidental
ground ing.
fi rst to prevent sparking from accidental
ground ing.
• Lift seat pan to raised position.
• Remove terminal protective caps and discard.
• If this battery is put into service after month and year
• Remove terminal protective caps and discard.
• If this battery is put into service after month and year
indicated on label (label located between terminals)
charge battery for minimum of one hour at 6-10 amps.
(See "BATTERY" in the Maintenance section of this
manual for charg ing in struc tions).
charge battery for minimum of one hour at 6-10 amps.
(See "BATTERY" in the Maintenance section of this
manual for charg ing in struc tions).
• First connect RED battery cable to positive (+) terminal
with hex bolt and keps nut as shown. Tighten securely.
Slide terminal cover over terminal.
Slide terminal cover over terminal.
• Connect BLACK grounding cable to negative (-) ter-
minal with remaining hex bolt and keps nut. Tighten
securely.
securely.
02604
FIG. 3
FIG. 4
HEX BOLT
NEGATIVE (BLACK)
CABLE
CABLE
POSITIVE (RED)
CABLE
CABLE
KEPS
NUT
NUT
SEAT PAN
TERMINAL
COVER
COVER
DISCARD TER MI NAL
PROTECTIVE CAPS
PROTECTIVE CAPS
LABEL